Arizona homes are hard on Wi-Fi: block walls, stucco, detached casitas and long single-story layouts. We plan networks for homes, home offices and small businesses across the Valley, remotely or with an on-site visit.
On-site visits are available in these cities and nearby communities. Remote planning works anywhere in the US.
Concrete block and stucco over metal lath absorb and reflect Wi-Fi far more than drywall. A router that covers 2,500 sq ft in a wood-frame house may struggle past one interior block wall, so we plan for more access points and wired links between them.
Detached casitas and backyard areas usually need their own access point, fed by Ethernet or an outdoor-rated link, rather than a router pushed to the far end of the house.
Summer attic and garage temperatures here routinely exceed the operating range printed on consumer networking gear. We keep routers, switches and modems in conditioned space and plan cable runs to match.
Summer storms bring outages and power surges. A small UPS for the modem and router, and surge protection on long outdoor cable runs, keeps the network up through brief outages.
Many newer homes in the East Valley ship with a structured-media panel and a few Ethernet drops. We plan how to use them for wired backhaul, and what to add before walls close if you're building.
Multi-gig fiber is available in parts of the Valley. Getting that speed to your devices takes a router with a fast enough port and wiring that keeps up; the router finder filters for it.
A video call and a review of your floor plan, speed tests and current gear, followed by a written list of what to fix first.
Ask about thisA room-by-room plan for router or access point placement, wired backhaul and the hardware to buy.
Ask about thisFor 2 Gbps and faster internet plans: find the bottlenecks between the modem and your devices and plan the upgrade.
Ask about thisDropouts, dead zones, lag spikes or slow speeds on some devices. We work through the causes with you and explain each fix.
Ask about thisPlan networks for dozens of smart devices: separate IoT and guest networks, Matter and Thread considerations, cameras and 2.4 GHz devices.
Ask about thisOffices, studios and new construction: plan low-voltage runs, rack location, access points, VLANs and the gear list before walls close.
Ask about thisPhysical installation work such as running cable is scoped separately and done by you or a qualified installer where Arizona licensing requires it.
A few details help us reply with useful next steps. Fields marked required are needed to send.
We received your request and will reply by email with next steps. If you don't hear from us, check your spam folder or write to [email protected].
Something else? Ask us and we'll answer by email.
On-site visits are available across the Phoenix metro by arrangement. Many homes can be planned remotely from a floor plan, photos and speed tests, which is usually faster.
Long single-story layouts put the far rooms a long way from the router, often behind several block or stucco walls. A second access point near those rooms, ideally connected by Ethernet, usually fixes it better than a more powerful router.
We don't recommend it here. Summer temperatures in Valley attics and garages often exceed what consumer routers are rated for, which shortens their life and can cause dropouts.
Often, if the mesh units can be linked by Ethernet. Wireless links between units lose a lot of speed through block walls, so we check where cable can run first.